BMW K 1100 RS Repair Manual download pdf (Page 253)

100

101

33.17

Installing rear wheel drive

•

Coat spline on sliding piece (arrow), for example

with Optimoly MP3.

•

Fit inner race (5) of right-hand needle bearing

with a little grease, e.g. Optimoly TA.

•

Fit rear wheel drive with gaiter in position, insert

sliding piece in drive shaft.

•

Loosely secure spring strut to rear wheel drive.

e Caution:

The bearing pin of the fixed bearing?(1) is micro-en-

capsulated, clean thread!

•

Screw in bearing pin (1) with Loctite 2701.

e Caution:

The inner bearing race must never press against the

end faces of the needles!

X Tightening torque:

Bearing pin of fixed bearing ....................... 150 Nm

(clean thread + Loctite 2701)

•

Screw in the bearing pin of the loose bearing (3)

with Loctite 2701.

X Tightening torques:

Bearing pin of loose bearing .......................... 7 Nm

(clean thread + Loctite 2701 applied to entire

length of thread on loose bearing pin)

Locknut...................................................... 105 Nm

e Caution:

The final tightening torque must be applied without

delay to threaded connections secured with

Loctite 2701. The Loctite requires at least 3 hours

to harden.

L Note:

To clean use an acetone-based cleaning product,

e.g.

Loctite 706 rapid cleaner

(Loctite order No. 70636-AC).

LT330320

1 2 ... 248 249 250 251 252 253 254 255 256 257 258 ... 363 364

Comments to this Manuals

No comments

BMW K 1100 RS Repair Manual Page 253

Comments to this Manuals

Related products and manuals for Motorcycles BMW K 1100 RS