BMW Z4 sDrive28i Owner's Manual download pdf (Page 86)

Accelerating using the lever

Accelerating slightly:

Press the lever to the resistance point, arrow 1,

and hold until the desired speed is reached.

Accelerating significantly:

Press the lever beyond the resistance point, ar‐

row 1, and hold until the desired speed is

reached.

The vehicle accelerates without pressure on the

accelerator pedal. The system stores and main‐

tains the speed.

Decreasing speed

Repeatedly pull the lever to the resistance point

or beyond, arrow 2, until the desired speed is

displayed.

▷ Each time the lever is pulled to the resist‐

ance point, the desired speed is decreased

by approx. 1 mph/1 km/h.

▷ Each time the lever is pulled beyond the re‐

sistance point, the desired speed is reduced

by up to 5 mph or 10 km/h until the minimum

speed of 20 mph/30 km/h is achieved.

The system stores and maintains the speed.

Interrupting the system

Push the lever upwards or downwards, arrow 3.

The displays in the speedometer change color.

In addition, the system is automatically inter‐

rupted in the following situations:

▷ When the brakes are applied.

▷ In cars with manual transmission, when

gears are shifted very slowly or if neutral is

engaged.

▷ In cars with Sport automatic transmission,

when transmission position N is engaged.

▷ When DTC is activated or DSC is deacti‐

vated.

▷ When DSC or ABS is intervening.

Cruise control is not deactivated by depressing

the accelerator pedal. Once the accelerator

pedal is released, the stored speed is achieved

again and maintained.

Warning lamp

The warning lamp comes on, for ex‐

ample, when cruise control has been

deactivated as a result of DSC inter‐

vention.

Deactivating the system

▷ Press the lever upward or downward twice,

arrow 3.

▷ Switch off the ignition.

The stored speed is cleared.

Resuming a speed stored beforehand

Press the button, arrow 4. The last stored speed

is resumed and maintained.

Displays in the instrument cluster

1 Stored speed

2 Selected speed is displayed briefly

If --- mph or --- km/h temporarily appears in the

instrument cluster display, it is possible that the

system prerequisites for operation are currently

not met.

Call up Check Control messages, refer to

page 67.

Malfunction

The warning lamp comes on when the

system has failed.

Seite 86

Controls Driving comfort

86

Online Edition for Part no. 01 40 2 609 184 - 09 11 500

1 2 ... 81 82 83 84 85 86 87 88 89 90 91 ... 219 220

Comments to this Manuals

No comments