BMW Z4 sDrive28i Owner's Manual Page 118

  • Download
  • Add to my manuals
  • Print
  • Page
    / 220
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 117
approx. 20 minutes. To listen to the radio, switch
it back on.
To spare the battery, ensure that the radio is
switched off when you leave the vehicle.
Adjusting the volume
Turn the left knob. The setting is stored for the
remote control currently in use.
When a call is placed using the hands-free sys‐
tem, the audio sources are muted.
Speed-dependent volume and volumes
of PDC signal tone and gong
"PDC": volume of the PDC signal tone com‐
pared to the audio sources.
"GONG": volume of the gong compared to
the audio sources.
"S-VOL": speed-dependent volume con‐
trol.
Set the audio sources to a high volume to be able
to adjust the volume of the signal tones more
easily.
1.
Press the button.
2. Select the symbol if necessary.
3. Select the desired volume setting.
4. Set the desired volume and press the right
knob.
Volume of external audio devices
An external audio device such as an MP3 player
can be connected via the AUX-IN port in the
center armrest and the audio tracks can be
played over the car's loudspeaker system.
The volume of the external audio device can be
adjusted to the car radio.
1.
Press the button.
2. "AUX"
3. "Vol-AUX"
4. Set the desired volume and press the right
knob.
Tone settings
"BASS": depth adjustment.
"TREBLE": treble adjustment.
"FADER": front/rear volume distribution.
"BAL": left/right volume distribution.
"DOLBY": spatial acoustics effect.
"EQSET": equalizer setting.
Setting the treble, bass, and volume
distribution
1. Press the button.
2. Highlight the desired tone setting and press
the right knob.
3. Create the desired setting and press the
right knob.
Switching on the spatial acoustics
effect
1.
Press the button.
2. Select the symbol if necessary.
3. "DOLBY"
Equalizer
1.
"EQSET"
2. Press the button of the desired frequency
range.
3. Create the settings and press the right knob.
Resetting the equalizer
1.
Press the button.
2. Turn the right knob.
3. "EQSET"
4. "RESET"
Resetting the tone settings
The tone settings are reset to medium values.
1.
Press the button.
Seite 118
Entertainment Professional Radio
118
Online Edition for Part no. 01 40 2 609 184 - 09 11 500
Page view 117
1 2 ... 113 114 115 116 117 118 119 120 121 122 123 ... 219 220

Comments to this Manuals

No comments