BMW SERIE 3 Owner's Manual download pdf (Page 143)

ror has been programmed. The system can

then be controlled by the button on the in‐

terior rearview mirror.

If the LED does not flash faster after at least

60 seconds, change the distance and repeat

the step. Several more attempts at different

distances may be necessary. Wait at least

15 seconds between attempts.

Canada: if programming with the hand-held

transmitter was interrupted, hold down the

interior rearview mirror button and repeat‐

edly press and release the hand-held trans‐

mitter button for 2 seconds.

Controls

Before operation

Before operating a system using the

integrated universal remote control, ensure that

there are no people, animals, or objects within

the range of movement of the remote-controlled

system; otherwise, there is a risk of injury or

damage.

Also follow the safety instructions of the hand-

held transmitter.◀

The system, such as the garage door, can be

operated using the button on the interior rear‐

view mirror while the engine is running or when

the ignition is started. To do this, hold down the

button within receiving range of the system until

the function is activated. The interior rearview

mirror LED stays lit while the wireless signal is

being transmitted.

Deleting stored functions

Press and hold the left and right button on the

interior rearview mirror simultaneously for ap‐

proximately 20 seconds until the LED flashes

rapidly. All stored functions are deleted. The

functions cannot be deleted individually.

Digital compass

At a glance

1 Control button

2 Mirror display

Mirror display

The point of the compass is displayed in the

mirror when driving straight.

Operating concept

Various functions can be called up by pressing

the control button with a pointed object, such as

the tip of a ballpoint pen or similar object. The

following setting options are displayed in suc‐

cession, depending on how long the control but‐

ton is pressed:

▷ Pressed briefly: turns display on/off.

▷ 3 to 6 seconds: compass zone setting.

▷ 6 to 9 seconds: compass calibration.

▷ 9 to 12 seconds: left/right-hand steering

setting.

▷ 12 to 15 seconds: language setting.

Setting the compass zones

Sets the particular compass zones on the vehi‐

cle so that the compass operates correctly; refer

to World map with compass zones.

Seite 143

Interior equipment Controls

143

Online Edition for Part no. 01 40 2 608 633 - 11 09 490

1 2 ... 138 139 140 141 142 143 144 145 146 147 148 ... 324 325

Comments to this Manuals

No comments