Bmw 335i xDrive Sedan 2014 User Manual download pdf (Page 91)

To avoid blinding oncoming traffic, the Adap‐

tive Light Control does not swivel to the driv‐

er's side when the vehicle is at a standstill.

When driving in reverse, only the cornering

lamp is active.

Malfunction

A Check Control message is displayed.

Adaptive light control is malfunctioning or has

failed. Have the system checked as soon as

possible.

High-beam Assistant

The concept

When the low beams are switched on, this sys‐

tem automatically switches the high beams on

and off or suppresses the light in the areas that

blind oncoming traffic. The procedure is con‐

trolled by a sensor on the front of the interior

rearview mirror. The assistant ensures that the

high beams are switched on whenever the traf‐

fic situation allows. The driver can intervene at

any time and switch the high beams on and off

as usual.

Activating

The High-beam Assistant can be activated

when the low beams are switched on.

1.

Turn the light switch to or .

2. Press the button on the turn signal lever,

arrow.

The indicator lamp in the instrument

cluster lights up.

When the low beams are on, the lights are au‐

tomatically brightened or dimmed.

The system responds to light from oncoming

traffic and traffic driving ahead of you, and to

adequate illumination, e.g., in towns and cities.

The blue indicator lamp in the instru‐

ment cluster lights up when the system

switches on the high beams. Depend‐

ing on the version of the system in the vehicle,

the high beams may not switch off for oncom‐

ing vehicles, but may only be dimmed in the

areas that blind oncoming traffic. In this case,

the blue indicator light will stay on.

Switching the high beams on and off

manually

▷ High beams on, arrow 1.

▷ High beams off/headlamp flasher, arrow 2.

The High-beam Assistant can be switched off

when manually adjusting the light. To reacti‐

vate the High-beam Assistant, press the but‐

ton on the turn signal lever.

System limits

Personal responsibility

The high-beam assistant cannot serve as

a substitute for the driver's personal judgment

of when to use the high beams. Therefore,

manually switch off the high beams in situa‐

tions where this is required to avoid a safety

risk.◀

Seite 91

Lamps Controls

91

Online Edition for Part no. 01 40 2 925 743 - II/14

1 2 ... 86 87 88 89 90 91 92 93 94 95 96 ... 241 242

Comments to this Manuals

No comments