Bmw 335i xDrive Sedan 2014 User Manual download pdf (Page 122)

If active, the displayed speed is stored and the

vehicle reaches the stored speed if the road is

clear.

▷ Each time the rocker switch is pressed to

the point of resistance, the desired speed

increases or decreases by approx.

1 mph/1 km/h.

▷ Each time the rocker switch is pressed

past the point of resistance, the desired

speed increases or decreases by a maxi‐

mum of 5 mph/10 km/h.

Hold the rocker switch in position to repeat the

action.

Distance

Selecting a distance

Adjust the distance according to the traf‐

fic and weather conditions; otherwise, there is

the danger of an accident occurring. Maintain

the prescribed safety distance.◀

Reduce distance

Press the button repeatedly until the

desired distance is set.

The selected distance, refer to page 123, is

displayed in the instrument cluster.

Increase distance

Press the button repeatedly until the

desired distance is set.

The selected distance, refer to page 123, is

displayed in the instrument cluster.

Calling up the desired speed and

distance

While driving

Press the button with the system

switched on.

In the following cases, the stored speed value

is deleted and cannot be called up again:

▷ When the system is switched off.

▷ When the ignition is switched off.

While standing

Before leaving the vehicle, secure it

against rolling

Before leaving the vehicle with the engine run‐

ning, engage position P of the automatic trans‐

mission and apply the parking brake. Other‐

wise, the vehicle may begin to roll.◀

The system brought the vehicle to a complete

standstill.

▷ Green marking in the speedometer:

Your vehicle accelerates automatically as

soon as the vehicle in the range of the ra‐

dar sensor moves off.

▷ Marking in the speedometer turns orange:

no automatic driving away.

To accelerate to the desired speed auto‐

matically, press the accelerator or press

the RES or SET button.

Rolling bars in the distance display indicate

that the vehicle in the radar sensor detection

range has moved off.

Your vehicle was braked to a halt by pressing

on the brake pedal and it is standing behind

another vehicle:

1. Press the button to call up a stored

desired speed.

2. Release the brake pedal.

3. Press on the accelerator briefly, or press

the RES rocker switch when the vehicle

ahead of you drives away.

Seite 122

Controls Driving comfort

122

Online Edition for Part no. 01 40 2 925 743 - II/14

1 2 ... 117 118 119 120 121 122 123 124 125 126 127 ... 241 242

Comments to this Manuals

No comments