Bmw 335i xDrive Sedan 2014 User Manual download pdf (Page 110)

ready to intervene; otherwise, there is the dan‐

ger of an accident occurring.◀

Detection range

The detection capability of the camera is lim‐

ited.

This may result in the warning not being is‐

sued or being issued late.

For example, the following situations may not

be detected:

▷ Partially covered pedestrians.

▷ Pedestrians that are not detected as such

because of the viewing angle or contour.

▷ Pedestrians outside of the detection range.

▷ Pedestrians having a body size less than

32 in/80 cm.

Functional limitations

The system may not be fully functional or may

not be available in the following situations:

▷ In heavy fog, rain, sprayed water or snow‐

fall.

▷ In tight curves.

▷ If the camera view field or the front wind‐

shield are dirty or covered.

▷ When driving toward bright lights.

▷ Up to 10 seconds after the start of the en‐

gine, via the Start/Stop knob.

▷ During calibration of the camera immedi‐

ately after vehicle shipment.

▷ When it is dark outside.

Lane departure warning

The concept

Starting at a specific speed, this system alerts

you when the vehicle on streets with lane

markings is about to leave the lane. This

speed, depending on the country version, is

between 35 mph/55 km/h and

45 mph/70 km/h.

When switching on the system below this

speed, a message is displayed in the instru‐

ment cluster.

The steering wheel begins vibrating gently in

the event of warnings. The time of the warning

may vary depending on the current driving sit‐

uation.

The system does not provide a warning if the

turn signal is set before leaving the lane.

Hints

Personal responsibility

The system cannot serve as a substitute

for the driver's personal judgment of the

course of the road and the traffic situation.

In the event of a warning, do not jerk the steer‐

ing wheel, as you may lose control of the vehi‐

cle.◀

At a glance

Button in the vehicle

Lane departure warning

Seite 110

Controls Safety

110

Online Edition for Part no. 01 40 2 925 743 - II/14

1 2 ... 105 106 107 108 109 110 111 112 113 114 115 ... 241 242

Comments to this Manuals

No comments