BMW R1150RT - MAINTENANCE INTEGRAL ABS Service Manual download pdf (Page 35)

00.30

00 11 209 Changing engine oil, replac-

ing oil filter element

(Inspections I, II, III and IV)

L Note:

If the motorcycle is ridden only for short distances or

outside temperatures are below 0°C (32°F) change

the oil and replace the oil filter element every 3

months, or not later than every 3,000 km (1,800

miles).

•

Change the oil at operating temperature.

•

Remove screw plug.

•

Remove oil drain plug and drain off oil.

•

Use oil filter wrench, BMW No. 11 4 650, to re-

move the oil filter.

•

Coat sealing ring on new oil filter element with oil

and install filter.

•

Reinstall the oil drain plug with a new sealing

ring.

•

Refill with oil to correct level.

•

Insert and tighten the screw plug.

e Attention:

Never top up the engine-oil level past the “MAX”

mark.

X Tightening torque:

Oil filter......................................................... 11 Nm

Oil drain plug................................................ 32 Nm

Engine oil capacities:

with oil filter renewal

...................3.75 l (6.60 Imp. pints/3.96 US quarts)

without oil filter renewal

...................3.50 l (6.16 Imp. pints/3.69 US quarts)

Quantity of oil between MIN and MAX marks

...................0.50 l (0.88 Imp. pints/0.52 US quarts)

Engine oil grade:

Brand-name HD oil for spark-ignition engines, API

classifications SF, SG, SH; combination with CD or

CE specification.

Brand-name HD oil of CCMC classification G4, G5;

amendment PD2 is permissible.

R22000080

11 4 650

C000030

BMW recommends Castrol

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 95 96

Comments to this Manuals

No comments

BMW R1150RT - MAINTENANCE INTEGRAL ABS Service Manual Page 35

Comments to this Manuals

Related products and manuals for Motorcycles BMW R1150RT - MAINTENANCE INTEGRAL ABS