Switch on ignition.
Press and hold down buttons 1
and 2 until LED 3 stops flash-
ing.
LED 3 flashes for about ten
seconds.
Release buttons 1 and 2.
LED 3 is illuminated.
Press button 1 or button 2.
LED 3 goes out.
Replacing battery of
remote control
If you press a button on the re-
mote control and the LED does
not show or lights up only briefly:
Replace the battery of the re-
mote control.
Open lid of battery compart-
ment 1.
Dispose of the old battery in
accordance with legal regula-
tions. Do not dispose of the
battery in the household waste.
Using batteries of the
wrong type or inserting
batteries with reversed polarity
can destroy the device.
Use a battery compliant with the
manufacturer's specifications.
When inserting the battery, make
sure that the polarity is correct.
Insert the new battery with the
positive terminal up.
Battery design and nom-
inal voltage
CR 1632 lithium
3 V
The LED on the remote control
lights up; the remote control
has to be synchronized.
4
70
z
Operation
Comments to this Manuals