BMW HP2 Service Manual download pdf (Page 41)

RACE mode

Display in RACE mode

In RACE mode the display shows

information on each lap, and this

information is also saved by the

instrument. The display is oper-

ated by the SET button on the

handlebar fitting or by means of

an infrared sensor available as

an optional accessory. When the

motorcycle has been brought to

a stop you can select the INFO

mode to view the information

stored in memory.

In RACE mode the LED strip

acts as an upshift indicator. You

can set the rpm threshold for

each LED.

You can use the display as a

LAP monitor or as a SPEED

monitor.

Readings of the LAP monitor:

Time expired on this lap

Fastest lap time

Number of laps completed

Race time expired

Each time you finish a lap the

readout indicating your lap time

is frozen for an adjustable peri-

od of time so that it is easier to

read. When this freeze time ex-

pires the readout switches back

to your current lap time.

Readings of the SPEED

monitor:

Highest speed on this lap

Lowest speed on this lap

Number of laps completed

Race time expired

The scope of information that

can be called up in INFO mode

depends on the monitor you se-

lect. If you switch temporarily to

ROAD mode, all measurements

are resumed in RACE mode.

Race-time measurement is auto-

matically interrupted for each

period for the duration of which

the motorcycle is at a standstill.

Measurement resumes as soon

as the motorcycle starts to move.

Lap timing continues even if the

motorcycle stops.

The measured values are re-

tained in memory if the ignition

is switched off. The measure-

ments are resumed as soon as

the ignition is switched on again.

4

37

z

Instrument panel

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 186 187

Comments to this Manuals

No comments