BMW X3 xDrive28i Technical Information Page 9

  • Download
  • Add to my manuals
  • Print
  • Page
    / 46
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 8
Condition Based Service (CBS)
CBS is a further development of the Service
Interval Indicator System. Sensors and
sophisticated algorithms take even more detailed
account of the various conditions of vehicle use.
The remaining times for selected maintenance
tasks as well as any legally prescribed dates are
displayed to you individually:
Engine oil
Brakes - front and rear separately
Brake fluid
Vehicle check
Required State Inspection(s)
CBS thus determines the current and future
maintenance requirements. This data can also be
read from the vehicle key by your BMW Service
Advisor and used to propose the optimum scope
of maintenance.
Disconnecting the battery during periods of
long-term storage will interrupt the
calculation of time-based services. Have all items
requiring time-based maintenance, such as
brake fluid and coolant, and possibly also the
engine oil, brought up to date by your BMW SAV
center. Also see the section on battery care on
page 11 of this Booklet.
Service Required Display
Info Display screen contents
The distance remaining until your next service
briefly appears when you switch on the ignition.
The Info Display immediately switches to its
compute mode when you press one of the
two buttons in the turn signal indicator lever.
The distance remaining until your next service
briefly appears when you switch on the ignition.
For certain maintenance operations, you can
view the respective distance remaining or due
date individually in the instrument cluster (X5 and
X6 only; see page 6) or in the Control Display (For
all models see page 7).
Info Display screens in the instrument
cluster (X5 and X6 only)
Display the remaining distance or the service
date for the various maintenance operations by
pressing the knob in the instrument cluster for
approximately five seconds. Then press the knob
quickly and repeatedly to display the successive
maintenance operations.
X3 only
X5 and X6
5
Page view 8
1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 45 46

Comments to this Manuals

No comments