BMW X3 xDrive28i Technical Information Page 5

  • Download
  • Add to my manuals
  • Print
  • Page
    / 46
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 4
2012 X3, X5 and X6 Models covered in this Booklet
X3 xDrive28i
X3 xDrive35i
X5 xDrive35i
X5 xDrive35d
X5 xDrive50i
X6 xDrive35i
X6 xDrive50i
BMW Ultimate Service
BMW Ultimate Service leads the industry in
providing owners with incredible value and peace
of mind. This service includes:
The BMW Maintenance Program: No-cost
factory-recommended maintenance for
4 years/50,000 miles from the original
in-service date, whichever comes first.
BMW Roadside Assistance: No-cost 24/7
on-the-road assistance for 4 years/unlimited
miles from the original in-service date. Also
includes trip-interruption benefits as well as
trip routing services.
New Vehicle Limited Warranty: Limited
coverage for defects in materials and
workmanship for 4 years/50,000 miles from
the original in-service date, whichever comes
first. Repairs will only be made at authorized
BMW SAV centers using Original BMW Parts.
Special Notes on the Diesel
Engine
At ambient temperatures below approximately
32ºF, starting the engine of the X5 xDrive35d
may be delayed for a few seconds while the
automatic fuel preheating system is active. An
indicator lamp in the instrument cluster will
illuminate during this time. Start the engine
only after the indicator lamp goes out.
Automatic fuel preheating indicator lamp
Engine breaking-in: Prior to driving the first
approximately 1,250 miles, do not exceed an
engine speed of 3,500 rpm; avoid full-throttle
acceleration and using the “kick-down”
function of the transmission. After this
mileage, engine speeds can be gradually
increased.
The BMW Advanced Diesel engine is
designed to run only on Ultra-Low Sulfur
Diesel (ULSD). This fuel designation contains
a maximum of 15 parts per million (ppm) of
sulfur. Service stations which dispense this
fuel will have their pumps marked with this
label:
The use of biodiesel fuel is acceptable as long
as the content is no higher than 5% (B5) which
meets ASTM D6751 specification. If a
biodiesel rated higher than B5 (such as B10 or
B20) is pumped into the vehicle, damage to
the fuel system components may occur.
1
Page view 4
1 2 3 4 5 6 7 8 9 10 ... 45 46

Comments to this Manuals

No comments