Bmw 550i xDrive Sedan 2014 User Manual download pdf (Page 171)

rearview mirror. The required distance de‐

pends on the manual transmitter.

4. Simultaneously press and hold the button

of the desired function on the hand-held

transmitter and the button to be program‐

med on the interior rearview mirror. The

LED on the interior rearview mirror will be‐

gin flashing slowly.

5. Release both buttons as soon as the LED

flashes more rapidly. When the LED is

flashing faster, this indicates that the but‐

ton on the interior rearview mirror has been

programmed.

If the LED does not flash faster after at

least 60 seconds, change the distance be‐

tween the interior rearview mirror and the

hand-held transmitter and repeat the step.

Several more attempts at different distan‐

ces may be necessary. Wait at least

15 seconds between attempts.

Canada: if programming with the hand-

held transmitter was interrupted, hold

down the interior rearview mirror button

and repeatedly press and release the

hand-held transmitter button for 2 sec‐

onds.

6.

To program other functions on other but‐

tons, repeat steps 3 to 5.

The systems can be controlled using the inte‐

rior rearview mirror buttons.

Special feature of the alternating-

code wireless system

If you are unable to operate the system after

repeated programming, please check if the

system to be controlled features an alternat‐

ing-code system.

Read the system's operating manual, or press

the programmed button on the interior rear‐

view mirror longer. If the LED on the interior

rearview mirror starts flashing rapidly and then

stays lit constantly for 2 seconds, the system

features an alternating-code system. Flashing

and continuous illumination of the LED will re‐

peat for approximately 20 seconds.

For systems with an alternating-code system,

the universal garage door opener and the sys‐

tem also have to be synchronized.

Please read the operating manual of the sys‐

tem being set up for information on how to

synchronize the system.

Synchronizing is easier with the aid of a sec‐

ond person.

To synchronize:

1. Park the vehicle within range of the re‐

mote-controlled system.

2. Program the relevant button on the interior

rearview mirror as described.

3. Locate and press the synchronizing button

on the system being programmed. You

have approx. 30 seconds for the next step.

4. Hold down the programmed button on the

interior rearview mirror for approximately

3 seconds and then release it. If necessary,

repeat this work step up to three times in

order to finish synchronization. Once syn‐

chronization is complete, the programmed

function will be carried out.

Reprogramming individual buttons

1.

Switch on the ignition.

2. Press and hold the interior rearview mirror

button to be programmed.

3. As soon as the interior rearview mirror LED

starts flashing slowly, hold the hand-held

transmitter for the system to be controlled

approx. 1 to 3 in/2.5 to 8 cm away from the

buttons on the interior rearview mirror. The

required distance depends on the manual

transmitter.

4. Likewise, press and hold the button of the

desired function on the hand-held trans‐

mitter.

5. Release both buttons as soon as the inte‐

rior rearview mirror LED flashes more rap‐

idly. When the LED is flashing faster, this

Seite 171

Interior equipment Controls

171

Online Edition for Part no. 01 40 2 928 000 - II/14

1 2 ... 166 167 168 169 170 171 172 173 174 175 176 ... 266 267

Comments to this Manuals

No comments