Bmw 2012 5 Series User Manual download pdf (Page 293)

3. Unscrew the bulb holder counterclockwise.

4. Remove the bulb and replace it.

5. Insert the new bulb and attach the cover in

the reverse order.

Xenon headlamps

Because of the long life of these bulbs, the like‐

lihood of failure is very low. Switching the lamps

on and off frequently shortens their life.

If a xenon bulb fails, switch on the front fog lamps

and continue the trip with great care. Comply

with local regulations.

Do not perform work/bulb replacement on

xenon headlamps

Have any work on the xenon lighting system, in‐

cluding bulb replacement, performed only by a

service center. Due to the high voltage present

in the system, there is the danger of fatal injuries

if work is carried out improperly.◀

For checking and adjusting headlamp aim,

please contact your BMW center.

At a glance

1 Corner-illuminating lamps

2 Parking lamp, daytime running lights

3 Low beams/high beams

4 Turn signal

Parking lamps and roadside parking lamps,

turn signal lamp

Follow the general instructions on lamps and

bulbs, refer to page 290.

These lights are made using LED technology.

Contact your service center in the event of a

malfunction.

Corner-illuminating lamps

Follow the general instructions on lamps and

bulbs, refer to page 290.

The illustration shows the left side of the engine

compartment.

Seite 293

Replacing components Mobility

293

Online Edition for Part no. 01 40 2 607 879 - 09 11 490

1 2 ... 288 289 290 291 292 293 294 295 296 297 298 ... 334 335

No comments

Bmw 2012 5 Series User Manual Page 293