BMW On-Board Computer Service Manual Page 132

  • Download
  • Add to my manuals
  • Print
  • Page
    / 184
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 131
Align the two adapters 2 so
that the front forks are securely
seated.
Tighten adjusting screws 1.
If the motorcycle is on the
centre stand and is raised
too far, the centre stand will lift
clear of the ground and the mo-
torcycle could topple to one side.
When raising the motorcycle,
make sure that the centre stand
remains on the ground.
Apply uniform pressure to push
the front-wheel stand down
and raise the motorcycle.
Bulbs
Replacing low-beam and
high-beam headlight bulb
The positions of the plug,
the spring wire retainer and
the bulb might not be as illus-
trated below.
Make sure the ground is level
and firm and place the motor-
cycle on its stand.
Switch off the ignition.
Remove cover 1 by turning
it counter-clockwise so as to
replace the low beam lamp.
8
130
z
Maintenance
Page view 131
1 2 ... 127 128 129 130 131 132 133 134 135 136 137 ... 183 184

Comments to this Manuals

No comments