BMW E66 Specifications download pdf (Page 8)

Version 31.01.2013 USB-E65

Page7

2.2. Installation of USB-box USBC-M536

The fibre optical interface installation is

made at the navigation computer, which

is located at the left side in the trunk

behind a cover and has to be removed.

The video lead (red/colored - video signal, black - video ground) has to be removed from the

white insert of C2C-BMW02. The white insert is not needed for E65/E66 installation.

Connect video lead of C2C-BMW02 to green 18-pin AMP connector

Video-signal (red) to chamber 3 of the green 18-pin AMP connector

Video-ground (black) to chamber 11 of the green 18-pin AMP connector

Remove fibre optics from black 20-pin plug and connect them as shown below. Then

reconnect the fibre optics in the black 20-pin connector and connect the MOST to the USB-

box USBC-M536.

Obey the direction

arrows of the optical

connectors!

14pin Molex connector

red – connect to +12V permanent current

black – ground

pink – remote signal +12V, high when navigation is on

white – The white wire is not connected and has to be isolated. In some cases it is possible

that the automatic switching does not work. In this case connect the white wire to the

reverse gear light (+12V).

green – camera power +12V (max 0.5A) on engaged reverse.

To black 20pin of

navigation computer

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

No comments

BMW E66 Specifications Page 8