BMW E38 User Manual download pdf (Page 6)

Attaching the Plain-Talk™ harness:

Note that your vehicle may be different than depicted.

Here is a picture of the AMP connector you are going to

look for in this picture, PIN 1 is labeled on the connec-

tor in small print (important so as to connect the har-

ness properly). This picture is of the center console of

a 2001 740 – but the connector is the same for all

models.

Attach (carefully) the harness making sure

to align the pins into the holes – ensure

that pin 1 is connected to pin 1 of the

harness as shown here:

Attach the harness to your Parrot kit as

per the Parrot documentation.

Run the mic and control panel wiring to

your desired location noting, again, the

Parrot documentation and recommenda-

tions.

SES Jumper plug

If your car was produced in June of 2000 or

newer, your vehicle will likely require what is

called an SES jumper plug.

When you are doing your install, look for a 26

pin BLUE connector in the trunk that looks

like the connector pictured here:

The “SES jumper plug”: This is a blue plug that attaches to

the above blue 26pin connector (it is in the same area as

the black connector you just found for using our harness).

This plug is necessary for your kit to function. It is BMW

part number: 84110018038 and it costs around $10.00. It

will look like this:

1 2 3 4 5 6 7 8 9 10

No comments

BMW E38 User Manual Page 6