Bmw Z4 sDrive35i 2009 User Manual download pdf (Page 201)

Mobility

199

Reference At a glanceControlsDriving tipsCommunications NavigationEntertainment

2. Press button 2 in the turn indicator lever.

The oil level is checked and the reading dis-

played.

Possible displays

1 Oil level OK

2 Oil level is being checked.

This can take about 3 minutes if the car is at

a standstill on a level surface, or about

5 minutes while the car is on the move.

3 Oil level down to minimum:

Add engine oil as soon as possible, but no

more than 1 US quart/1 liter, refer also to

Adding engine oil on page 200.

4 Oil level is too high.

Too much oil will harm the engine.

Have the vehicle checked without

delay.<

5 The oil level sensor is defective.

Do not add engine oil. You can continue

your journey. Note the newly calculated dis-

tance remaining to the next oil service, refer

to page 69. Have the system checked as

soon as possible.

Display via iDrive

iDrive, for operating principle refer to page 16.

1. "Vehicle Info"

2. "Vehicle status"

3. "Engine oil level"

Possible messages

> "Engine oil level OK"

> "Measurement not possible at this time."

> "Measuring engine oil level...":

This can take about 3 minutes if the car is at

a standstill on a level surface and the engine

is running, and about 5 minutes while the

car is moving.

If engine oil was added, it may take up to

30 minutes to obtain an oil level reading.

> "Engine oil level below minimum. Add 1

quart!"

Add engine oil as soon as possible, but no

more than 1 US quart/1 liter, refer also to

Adding engine oil below.

> "Engine oil level too high! Have this

checked."

Too much oil will harm the engine.

Have the vehicle checked without

delay.<

1 2 ... 196 197 198 199 200 201 202 203 204 205 206 ... 247 248

Comments to this Manuals

No comments

Bmw Z4 sDrive35i 2009 User Manual Page 201

Comments to this Manuals

Related products and manuals for Cars Bmw Z4 sDrive35i 2009