BMW X6 M Owner's Manual download pdf (Page 28)

Things to remember when driving

26

Things to remember when driving

Break-in period

Moving parts need breaking-in time to adjust to

each other. To ensure that your vehicle contin-

ues to provide optimized economy of operation

throughout an extended service life, we request

that you devote careful attention to the follow-

ing section.

Engine and rear axle differential

Always obey all official speed limits.

Up to 1,200 miles/2,000 km

Drive at various engine and vehicle speeds, but

do not exceed:

> 4,500 rpm or 100 mph/160 km/h

Avoid full-throttle operation and use of the

transmission's kick-down mode during these

initial miles.

From 1,200 miles/2,000 km

The engine and vehicle speed can gradually be

increased.

Brake system

Brakes require an initial break-in period of

approx. 300 miles/500 km to achieve optimized

contact and wear patterns between brake pads

and rotors. Drive in a reserved manner during

this break-in period.

Following part replacement

Observe the break-in instructions again if com-

ponents mentioned above must be replaced

after subsequent driving operation.

Saving fuel

The fuel consumption of your vehicle depends

on various factors. Through a few simple steps,

your driving style, and regular maintenance, you

can have a positive influence on your fuel con-

sumption and environmental impact.

Removing unnecessary cargo

Additional weight increases fuel consumption.

Removing add-on parts after use

Remove unneeded auxiliary mirrors, roof or rear

luggage racks after use. Add-on parts attached

to the vehicle impede the aerodynamics and

increase the fuel consumption.

Closing windows and glass sunroof*

An open glass sunroof or window likewise

increases air resistance and thus fuel consump-

tion.

Checking tire inflation pressures

regularly

Check and correct the tire inflation pressure as

needed at least twice a month and before long

trips.

An insufficient tire inflation pressure increases

the rolling resistance and thus increases the

fuel consumption and tire wear.

Driving off immediately

Do not allow the engine to warm up by leaving it

running while the vehicle remains stationary.

Instead, begin to drive at a moderate engine

speed. This is the fastest way for the cold

engine to reach its operating temperature.

Thinking ahead when driving

Avoid unnecessary acceleration and braking.

To do so, maintain the appropriate distance

from the vehicle in front of you. An anticipatory

and smooth driving style reduces fuel con-

sumption.

Avoiding high engine speeds

Driving at a low engine speed reduces fuel con-

sumption and minimizes wear.

Online Edition for Part no. 01 41 2 603 632 - © 09/09 BMW AGOnline Edition for Part no. 01 41 2 603 632 - © 09/09 BMW AG

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 53 54

Comments to this Manuals

No comments