Bmw M3 Convertible 2006 User Manual download pdf (Page 86)

86

Dynamic Stability Control DSC

The concept

DSC supports vehicle stability, even in

critical driving situations.

DSC optimizes driving stability and

traction during acceleration and when

you are starting from a standstill. In

addition, it also recognizes unstable

vehicle conditions, such as understeer-

ing and oversteering. By reducing

engine power and applying brakes at

the wheels, DSC helps to keep the

vehicle on a steady course within phys-

ically feasible limits.

The system starts up automatically

each time you start the engine.

The laws of physics cannot be

repealed, even with DSC. The

driver remains responsible for the con-

sequences of any inadequate driving

style. Therefore, do not take any risks

because of the additional safety pro-

vided. Do not make any modifications

to the DSC system. Allow only autho-

rized technicians to perform service

procedures on the DSC.<

Indicator lamp for DSC

The indicator lamp in the instru-

ment cluster will go out shortly

after the ignition has been

switched on, refer to page 20.

> The indicator lamp flashes: DSC is

active and is controlling the drive

torque based on driving conditions

> The indicator lamp does not go out

after the engine is started or lights up

continuously while you are driving:

DSC has been deactivated via the

button or is defective.

Please consult your BMW center for

repairs.

You can continue to drive the vehicle

normally without DSC. In the event of a

malfunction, contact a BMW center or a

workshop that works according to

BMW requirements with appropriately

trained personnel.

To deactivate DSC

Press the DSC button; the DSC indica-

tor lamp lights up continuously. DSC is

switched off.

When better traction is required, it is

beneficial to deactivate the system in

the following situations:

> When rocking the vehicle or starting

off in deep snow or on loose surfaces

> When driving with snow chains.

To maintain vehicle stability,

always drive with the system

switched on whenever possible.<

To reactivate DSC

Press the DSC button again; the indica-

tor lamp goes out.

Online Edition for Part-No. 01 41 0 158 515 - © 09/04 BMW AG

1 2 ... 81 82 83 84 85 86 87 88 89 90 91 ... 173 174

Comments to this Manuals

No comments