BMW 630 BROCHURE 2008 Owner's Manual download pdf (Page 213)

Mobility

211

Reference At a glanceControlsDriving tipsCommunications NavigationEntertainment

Coolant

Do not add coolant to the cooling system

when the engine is hot. Escaping coolant

can cause burns.<

Coolant is composed of equal parts water and a

coolant additive. Not all commercially available

additives are suitable for your BMW. Ask your

BMW center for suitable additives.

Only use suitable additives, otherwise

engine damage may result. The additives

present a health hazard; observe the instruc-

tions on the containers.<

Comply with the appropriate environ-

mental protection regulations when dis-

posing of coolant additives.<

Checking coolant level

1. Do not open the hood until the engine has

cooled down.

2. Turn the cap of the expansion tank counter-

clockwise to allow any accumulated pres-

sure to escape, then continue turning to

open.

3. The coolant level is correct when the upper

end of the float rod is at the same height as

the upper edge of the filler neck, also refer

to the drawing next to the filler neck.

4. If the coolant is low, slowly add coolant up to

the specified level – do not overfill.

5. Turn the cap until there is an audible click.

6. Have the reason for the coolant loss elimi-

nated as soon as possible.

1 2 ... 208 209 210 211 212 213 214 215 216 217 218 ... 259 260

No comments

BMW 630 BROCHURE 2008 Owner's Manual Page 213