BMW 328d Owner's Manual download pdf (Page 46)

Opening/closing the glass sunroof

When the sliding visor is open, proceed as de‐

scribed under Sliding visor.

Opening/closing the glass sunroof and

sliding visor together

Briefly press the switch twice in

succession in the desired direc‐

tion past the resistance point.

The glass sunroof and sliding vi‐

sor move together. Pressing the

switch again stops the motion.

Convenient opening, refer to page 35, via the

remote control.

Convenient closing, refer to page 40, with

Comfort Access.

Comfort position

Stops the roof in the comfort position if the

roof is not fully open. This reduces wind noise

in the passenger compartment.

If desired, continue the movement by pressing

the switch.

Pinch protection system

If the closing force when closing the glass sun‐

roof exceeds a certain value, the closing move‐

ment is stopped, beginning at approximately

the middle of the opening in the roof, or from

the tilted position during closing.

The glass sunroof opens again slightly.

Danger of pinching even with pinch pro‐

tection

Despite the pinch protection system, check

that the roof's closing path is clear; otherwise,

the closing action may not be interrupted in

certain extreme situations, such as when thin

objects are present.◀

Closing from the open position

without pinch protection

For example, if there is an external danger, pro‐

ceed as follows:

1. Press the switch forward beyond the re‐

sistance point and hold.

Pinch protection is limited and the roof re‐

opens slightly if the closing force exceeds

a certain value.

2. Press the switch forward again beyond the

resistance point and hold until the roof

closes without pinch protection. Make sure

that the closing area is clear.

Closing from the raised position

without pinch protection

If there is an external danger, push the switch

forward past the resistance point and hold it.

The roof closes without pinch protection.

Initializing after a power failure

After a power failure during the opening or

closing process, the roof can only be operated

to a limited extent.

Initializing the system

The system can be initialized when the vehicle

is stationary and the engine is running.

During the initialization, the roof closes without

pinch protection.

Keep the closing path clear

Monitor the closing process and make

sure that the closing path of the glass sunroof

is clear; otherwise, injuries may result.◀

Press the switch up and hold it

until the initialization is com‐

plete:

▷ Initialization begins within

15 seconds and is com‐

pleted when the sunroof and

sliding visor are completely

closed.

Seite 46

Controls Opening and closing

46

Online Edition for Part no. 01 40 2 925 793 - II/14

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 243 244

Comments to this Manuals

No comments