BMW 228i Owner's Manual download pdf (Page 82)

Yellow lights

Anti-lock Braking System ABS

Avoid abrupt braking if possible. Brak‐

ing force boost in some cases defec‐

tive. Stop carefully. Take into account

longer brake travel. Have this checked

by the service center immediately.

DSC Dynamic Stability Control

Flashing: DSC controls the drive and

braking forces. The vehicle is stabi‐

lized. Reduce speed and adapt driving

profile to the driving circumstances.

Illuminated: DSC failed. Have the system

checked by the service center.

For additional information, refer to Dynamic

Stability Control DSC, refer to page 112.

DSC Dynamic Stability Control is

deactivated or DTC Dynamic Traction

Control is activated

Dynamic Stability Control DSC is

switched off or Dynamic Traction Con‐

trol DTC is switched on.

For additional information, refer to Dynamic

Stability Control, refer to page 112, and Dy‐

namic Traction Control, refer to page 113.

Flat Tire Monitor FTM

The Flat Tire Monitor signals a loss of

tire inflation pressure in a tire.

Reduce your speed and stop cau‐

tiously. Avoid sudden braking and steering ma‐

neuvers.

For more information, see Flat Tire Monitor, re‐

fer to page 102.

Tire Pressure Monitor TPM

Illuminated: the Tire Pressure Monitor

signals a loss of tire inflation pressure

in a tire.

Reduce your speed and stop cautiously. Avoid

sudden braking and steering maneuvers.

Flashing and then continuously illuminated: no

flat tire or loss of tire inflation pressure can be

detected.

▷ Interference through systems or devices

with the same radio frequency: after leav‐

ing the area of the interference, the system

automatically becomes active again.

▷ TPM could not conclude the reset: perform

the reset of the system again.

▷ A wheel without TPM electronics is fitted:

have the service center check it if needed.

▷ Malfunction: have the system checked by

your service center.

For more information, see Tire Pressure Moni‐

tor, refer to page 98.

Steering system

Steering system in some cases defec‐

tive.

Have the steering system checked by

the service center.

Engine functions

Have the vehicle checked by the serv‐

ice center.

For additional information, refer to On-

board Diagnostics socket, refer to page 192.

Lane departure warning

System is switched on and under cer‐

tain circumstances warns if a detected

lane is left without flashing beforehand.

For additional information, refer to Lane depar‐

ture warning, refer to page 109.

Seite 78

Controls Displays

78

Online Edition for Part no. 01 40 2 961 270 - II/15

1 2 ... 77 78 79 80 81 82 83 84 85 86 87 ... 231 232

Comments to this Manuals

No comments