BMW 2010 650 Service Manual download pdf (Page 47)

The engine starts.

Consult the troubleshooting

chart below if the engine re-

fuses to start. ( 106)

Pre-ride check

The instrument cluster runs a

test of the instruments and the

warning lights and telltale lights

and the display when the igni-

tion is switched on. This test is

known as the "Pre-Ride-Check".

Phase 1

The warning and telltale lights

are switched on, along with all

the segments of the multifunc-

tion display.

Phase 2

The speedometer needle swings

to the limit value on its scale and

back to the initial position.

Phase 3

All lights and all the segments in

the display switch off.

The instrument panel goes to its

normal operating mode.

If the needle did not move, if a

warning light or telltale light did

not show as specified above or if

a segment or segments of the

multifunction display failed to

light up:

Some malfunctions cannot

be indicated if one of the

warning lights fails to show.

Make sure that all the warning

and telltale lights come on in the

pre-ride check.

Have the fault rectified as

quickly as possible by a

specialist workshop, preferably

an authorised BMW Motorrad

dealer.

ABS self-diagnosis

with BMW Motorrad ABS

OE

BMW Motorrad ABS performs

self-diagnosis to ensure its op-

erability. Self-diagnosis is per-

formed automatically when you

switch on the ignition. The mo-

torcycle has to move forward a

few metres for the wheel sensors

to be tested.

Phase 1

Test of the diagnosis-compat-

ible system components with

the motorcycle at a standstill.

ABS warning light flashes.

Phase 2

Test of the wheel sensors as

the motorcycle pulls away from

rest.

ABS warning light flashes.

5

46

z

Riding

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 135 136

Comments to this Manuals

No comments