BMW 2004 645Ci Owner's Manual download pdf (Page 86)

Technology for comfort, convenience and safety

84

6. Press the controller.

The information appears on the

Head-Up Display.

Depending on which key you have used to

open the vehicle, the last adjustment is

applied.

Adjusting brightness

The brightness of the display is automati-

cally adapted to the ambient lighting condi-

tions. However, you can change the base

setting.

With the low beams switched on, the

brightness can also be adjusted with the

serrated dial of the instrument lighting.

Control Center, for principle details, refer to

page 16:

1. Open the menu

2. Select "Display settings" and press the

controller

3. Select "Brightness" and press the con-

troller

4. If necessary, move the controller to the

left to select "Head-Up Display Offset"

5. Turn the controller until the desired set-

ting is selected.

Depending on which key you have used to

open the vehicle, the last adjustment is

applied.

Notes

The recognizability of the displays in the

Head-Up Display is influenced by:

> Sunglasses with certain polarization

filters

> Certain seating positions

> Objects on the cover of the Head-Up

Display

> Wet road surface and unfavorable light-

ing conditions.

If the image is distorted, please have the

base setting checked at a BMW center.

Special windshield

The windshield is part of the system. The

shape of the windshield complies with the

requirements of the Head-Up Display to

enable a precise display. A film in the wind-

shield prevents the double images from

being displayed.

To have the windshield replaced, contact a

BMW center.

Care instructions

You can find everything you need to know

on this topic by consulting the Caring for

your vehicle brochure.

Only clean the cover of the Head-Up

Display with a soft, non-abrasive cloth

or a display cleaning cloth, as otherwise

damage may result.<

Online Edition for Part No. 01 41 0 157 980 - © 01/04 BMW AG

1 2 ... 81 82 83 84 85 86 87 88 89 90 91 ... 215 216

Comments to this Manuals

No comments