BMW 135I - ANNEXE 168 Owner's Manual download pdf (Page 95)

Controls

93

Reference At a glanceDriving tipsCommunications NavigationEntertainmentMobility

until "Lighting" is selected and press the

controller.

7. Select "Daytime running lamps" and press

the controller.

The daytime running lamps are

switched on.

The setting is stored for the remote control cur-

rently in use.

Adaptive Head Light*

The concept

Adaptive Head Light is a variable headlamp

control system that enables better illumination

of the road surface. Depending on the steering

angle and other parameters, the light from the

headlamp follows the course of the road.

In tight curves at speeds up to 40 mph/70 km/h,

e.g. on mountainous roads or when turning, an

additional, corner-illuminating lamp is switched

on that lights up the inside area of the curve.

Activating Adaptive Head Light

With the ignition switched on, turn the light

switch to position 3, refer to page 91.

The corner-illuminating lamp is switched on

automatically, depending on the steering wheel

angle or turn signal indicator.

To avoid blinding oncoming traffic, the Adaptive

Head Light directs light towards the front pas-

senger side when the vehicle is at a standstill.

When you are reversing, only the corner-illumi-

nating lamps are active and switched on on

both sides.

Malfunction

The LED next to the symbol for automatic head-

lamp control flashes. Adaptive Head Light is

malfunctioning or has failed. Have the system

checked as soon as possible.

High beams/roadside parking

lamps

1 High beams

2 Headlamp flasher

3 Roadside parking lamps

*

Roadside parking lamps, left or right*

There is an additional option of switching on the

lamps on the side of the car facing the road

when parked.

Switching on

After parking the vehicle, press the lever up or

down beyond the pressure point for approx.

1 second, arrow 3.

The roadside parking lamps drain the bat-

tery. Therefore, do not leave them on for

unduly long periods of time, otherwise the bat-

tery might not have enough power to start the

engine.<

Switching off

Press the lever in the opposite direction to the

pressure point, arrow 3.

Online Edition for Part no. 01 41 0 014 691 - © 11/07 BMW AG

1 2 ... 90 91 92 93 94 95 96 97 98 99 100 ... 259 260

Comments to this Manuals

No comments