BMW NAVIGATOR IV - REV A Owner's Manual download pdf (Page 45)

BMW Motorrad Navigator III Owner’s Manual 37

APPENDIX

Technical Speciﬁcations

Size: 5.6” W x 3.2” H x 2.0” D (14.3 x 8.0 x 5.0 cm)

Weight

: 0.93 lb (420 g)

Unit Case: Rugged; fully gasketed; IPX7 waterproof*

Display: Sunlight-readable, 17:9 WQVGA automotive color TFT

display with touch screen and auto dimming; 454 pixels by 240

pixels,

Map Storage: Pre-programmed internal memory

Temperature

: 5° to 158°F (-15° to 70°C)

Power Supply

Source: 12 VDC

Usage: 12 watts maximum @ 13.8 VDC

12-volt adapter Fuse: AGC/3AG - 1.0 Amp

Optional Remote Control: Two AAA alkaline batteries (not

included).

* Note: The remote control is not waterproof.

For a complete list of speciﬁcations, visit the Garmin Web site:

http://www.garmin.com/products/navigatorIII/spec.html.

Contact your local waste disposal department for information on

properly disposing of the unit.

Changing the Fuse

The Vehicle Navigation Kit cable has a 3AG 1.0 Amp fast blow

fuse located at the tip of the 12-Volt adapter. If you need to change

the fuse, unscrew the black, round end piece and replace the fuse.

Unscrew

Using a Remote GPS Antenna

Use an optional external remote GPS antenna (Garmin GA 25)

when using the unit in a vehicle with a coated windshield or an

in-screen heating system, which can block GPS signals. Connect

the antenna to the MCX connector located on the back of the unit.

To purchase, go to http://www.garmin.com/products/navigatorIII.

Click Accessories.

1 2 ... 40 41 42 43 44 45 46 47 48 49 50

No comments

BMW NAVIGATOR IV - REV A Owner's Manual Page 45